Short Rows: Shadow Wraps

Over the last couple weeks I’ve reviewed the plain wrap, the yarn over wrap, the Japanese wrap, and the double stitch wrap. Finally we come to my little unvention, the shadow wrap.

Thank you to Penny, Aurelia & Alice for their eagle sharp eyes! The instructions have been updated.

Method #5: Shadow Wraps

With the shadow wrap all the work is done when creating the wrap – once you’re done, the shadow wrap dissolves into the shadows, and yay! gets ignored!! It’s easy to see, so you can tell where to stop and turn, and easy to work since you simply treat the shadow as, well, the inseparable shadow to its twin stitch, that is you ignore it.

The first step is to knit to the turning stitch.

Knit to turning stitch

Before going any further, let’s just take a moment to identify the relevant stitches.  We’ll be creating the ‘shadow’ wraps from the the mama stitches – blue in the photo below. The daughter stitch is the shadow’s ‘twin’ stitch, from the same mama stitch as the  shadow.

Daughter & Mama Stitches

Pick up the mama stitch with your right needle.

Pick up mama sittch

Place the mama stitch on your left needle to the right of the daughter stitch (ie closest to the tip of the left needle), being careful not to twist it.

Place mama stitch on needle

Knit into the mama stitch (only the mama stitch, not the daughter one) knitwise – be careful not to knit into the back loop by accident.

Knit mama stitch

New shadow created

The shadow wrap is now on your right needle; the mama and her daughter still on the left needle.

Drop the mama stitch from the left needle.

The shadow wrap (on the right needle) and the daughter stitch (on the left needle) both come from the same mama stitch (hence the term ‘twinned’ stitches).

Daughter & Shadow wrap

Slip the daughter stitch from the left needle to the right needle.

Slip daughter to right needle

Now you have the shadow and the daughter stitch sitting prettily together – “twinned” stitches that should be treated as one single stitch – joined at the hip, as it were.

Turn the work. Slip the twinned stitch. Remember these are treated as one single stitch, just like a person and their shadow are one and can’t be separated.

Slip twinned stitch as one

The twinned stitches are easy to see – helping to identify exactly where to stop to create a new shadow wrap.

Creating a shadow wrap on the purl side is even easier.  Purl to the turning stitch, and slip it to the right needle.  This is the stitch which will become twinned with a shadow wrap.

Turning stitch slipped to right needle

With the left needle, pick up the head of the mama stitch.

Pick up mama

And purl it. No need to move it from needle to needle, just go ahead and purl that mama.

Purl mama stitch

And voila! Shadow wrap made, twin stitch created. All done. Yay!

Purl mama

Shadow wrap finished and twin stitch created

When you turn the work to the knit side, slip the twinned stitch, and work the rest of the row as normal.

Now, when you come back to working the twin stitches – remember what I said about just letting the shadow dissolve into the, er, shadows?  And treating the twinned stitches as one single stitch? It means when you come to working them just knit them when you come to them on the knit side, and purl them on the purl side.  No need for extra work there.

The front of the worked wraps looks like this:

Front of worked shadow wraps

And the back like this.

Back of worked shadow wraps

I totally love this method – it’s easy. It’s clean. It looks nice when it’s finished. The back is smooth. I can keep track of where my wraps are since the twinned stitches are so easily identifiable.  And best of all, when I’m motoring back after making all those wraps, I don’t have to do anything special at all. For me, slothfulness is the mother of invention (necessity – pah!).  The less work, the better!

Short Rows: Double Stitches

Next up in my short row review are double stitches – a technique I came across in Stephanie van der Linden’s book “The Sock Knitter’s Workshop”. I don’t know the provenance of this technique, and as Montse Stanley doesn’t mention it in her book the Knittter’s Handbook (my go-to reference book) I was intrigued. Turns out they are fun and funny little stitches.

Method #4: Double Stitches

Double stitches

To make a double stitch is a very easy thing – knit the turning stitch.

Knit turning stitch

Turn your work, and slip the first stitch (that’ll be the turning stitch you knit on the RS)

Turn and slip

Now comes the fun bit – take the working yarn and pull it taut, up and over the needle towards the back.

Pull yarn up and over

The aim is to create two stitches from the loop on the right needle.  In the photo  below I’ve pulled the yarn nice and taut.  The loops either side of my working yarn are from the single slipped stitch.

Close up of double stitch

Effectively by pulling the working yarn tight, and then bringing it back around to purl we create a wrap around the slipped stitch which has been butterflied to make 2 loops.

Side view of double stitch

A side view of the working yarn pulled taut.

Double stitch view from other side

I flipped the work over to take a photo from the knit side – the top of the slipped stitch is pulled right over the needle, making 2 loops from the original stitch. This is the ‘double stitch’.  To continue working the purl side, after pulling the working yarn nice and tight, take it back to the front between the needles and purl the next stitch.

Purling next stitch on PS

I think double stitches are kind of funky. I deconstructed it to show you better since it took me a little while to figure out what was going on with all those loops.

Double stitches

In the photo above are 3 double stitches on the left needle.  Can you see the wrap and the original stitch butterflied?

The photo below should help deconstruct what’s going on. The white stitch was the stitch that got pulled round the needle by the working yarn.  See how the head of the stitch is pulled right round the needle, making 2 loops? The head is dissected by the working yarn (yellow) that was pulled round tight and then purled across the row. See how it makes a wrap around one half of the white stitch? And cleverly, the white stitch sandwiches the wrap so when you come to work the double stitch the wrap is hidden – on both sides of the work! Clever clever.

The blue stitch was the second last stitch on the knit side row, and the orangey-yellow stitch is the first purled stitch after creating the double stitch so you can place the wrap in context.

Double stitch and wrap

When you come to working the double stitches, treat them as a single stitch and knit both loops together.

Knit double stitch as one

Here are a few close ups of working the double stitch as one.

View of knitting double stitch as one

Knitting double stitch (both loops)

This is the front of the worked double stitches.

Worked double stitches

And the back of the worked double stitches.

Back of worked double stitches

I like this method – it’s easy and fun to make the double stitches. I’m not hugely fond of the back of the work though since it feels quite bumpy so I wouldn’t like to use them socks. Still, a nice little technique to have in your back pocket!

Last up… Shadow wraps

Cornish Delights

We’ve arrived safely in Cornwall and settled into the hotel.  We met up with Ali, Tricia & Isabelle at the airport, and boarded the wee propeller plane together.  The coast here is really beautiful, and the bar has huge picture windows so we can enjoy the view, without venturing outside as it is quite chilly!  Even so, there are still hard core surfers tackling the waves.

Hard core!

Your eyes don’t deceive you – there are 4 surfers in that photo taken this morning at 830 am. It’s 3 degrees out. More surfers joined them shortly after the photo was taken. That is seriously impressive.

Michelle of Three Bags Full sent us two project bags which are going to be given away as prizes during the retreat – thank you Michelle!

Cookie with Three Bags Full project bag

Anne with Three Bags Full project bag

Today everyone has been busy knitting lace socks with Anne and learning about traveling stitches with Cookie.  Am loving the happy faces, and the intense focus that you get with a room full of knitters, intent on learning new skills.  Awesome!

Anne's Marie Antoinette Class

Knitdra asked about the angle of the turn on regular wraps and Japanese wraps.  The best way to answer your question is to show you a picture.  I’ve made a little graphical representation of the short rows.

In the graph below, the regular wrap technique is on the left, the Japanese technique with the slipped stitches on the right.  The dots are knit stitches, the purls are squiggly dashes, the Vs are slipped stitches, and the funny flourish is the wrap.  In both methods, the angle is the same – however, with Japanese wraps, because of the slipped stitch, the angle has a smoother transition when working the wraps. I’m not sure there is much discernible difference but I will do some short row comparisons and report back.

Short rows: Japanese Wraps

Picked up Cookie and Anne from the airport yesterday morning – lucky that they arrived when they did as the next flights out of NYC were canceled due to bad weather.  Deuce immediately decided he was in love with Cookie and snuggled up to her for a snooze.  Hopefully heading to Borough Market for a spot of lunch today.  Weather a bit crap, but according to BBC it’ll be sunny in Cornwall this weekend for the retreat. Yay!

Newly dyed Sokkusu-O yarn in Granooey

I got a box full of my Sokkusu-O yarn (*** happy dance ***) and dyed some up.  In green of course. I really love green.  And I started knitting with it – and am in love. I know I’m fickle when it comes to yarn… something pretty and new is always likely to turn my head… but I think I found my yarnie soulmate.  This is truly awesome stuff.  A proper fingering weight (16wpi), 3 ply tightly twisted yarn.  But not so tightly twisted that it loses its ‘ooomph’.  It’s still super bouncy and sproingy and squishy!  When I get back from Cornwall I’ll dye more up. I think some more contests are in order!

Back to my Short Row Study.

Method #3: Japanese Wraps

In Japanese short rows the work is done mostly on the return rows – that is when setting up the short rows all you do is turn. You knit to the turning point, then turn the work. On my sample, I knit to the turning point, turned the work, slipped the first stitch and purled to the end. Next knit row I knit to one stitch before the gap, and turned again. The finicky bit is picking up the wraps to work them. Well, the most finicky bit. To help with this, you can use safety pins to aid in picking up these wraps. I’ll explain.  In the photo below I’ve knit to my turning point (this is where the gap will be).

Knit and turn

Turn the work. On the purl side, slip the first stitch.  That’s the stitch in the photo below with the working yarn coming out of it.

Slip first stitch on purl side

Here’s a Blue Peter moment – I threaded some safety pins to the yarn beforehand. Moving the first safety pin across to the base of the slipped stitch this sets me up to create my first Japanese wrap.

Adding the safety pin

Purl as normal, keeping the safety pin put. See the pin below? It catches the bar between the fist slipped stitch and its neighbour.  One Japanese wrap created.

First safety pin

If you are doing a number of wraps, the back of your work would look something like this. Remember – I’m only doing wraps on one side of the work. Both sides would double the number of safety pins.

Four Japanese wraps with safety pins

When you are ready to work those wraps, knit to the first gap.   The first safety pin should be two rows down, between the first two st columns on the right needle (closest to the tip).

Getting reading to pick up Japanese wrap

Now you’ll see why the safety pin comes in handy. Grab the first safety pin and place the loop created onto the left needle.  That’s the Japanese wrap, one one side of the gap, and the next stitch on the other. Work those two together (k2tog) and it closes the gap.  Repeat until all the Japanese wraps have been picked up and worked. Without those ickle safety pins, those bars would be a pain in the bum to find.

Picking up the first wrap

Worked Japanese wraps

Back of worked Japanese wraps

For thicker gauge yarns I think this would be a little easier to work without the safety pins, as it would be easier to see and pick up the wrap.  But for thinner yarns like sock or sport, it’s fiddly without the safety pins to help. But then the pins themselves are pretty fiddly too.  I’m not one to use stitch markers much – I don’t like having stuff hanging off my work.  It’s one of the reasons I don’t like using DPNs – too many things to keep track of.  So, not surprisingly, this is one of my least favourite methods.  But there you go – knowledge is power and it could be that you’ll love this method.  But those safety pins…..  argh.  Too much!

Next up… Double stitches

Short Rows: Yarn overs

Sokkusu-L yarn for Anne Hanson's sock class

Phew! I’m beat, but happy. Over the course of the last week I’ve been crazily dyeing yarns – and I”m finally almost done. Only another day’s dyeing to do and I can take a little break before starting up again. I had over 75 skeins of yarn to wind into little cakes but thank goodness alot of lovely angelic volunteers come to my rescue. KLC club yarns are also parcelled up and will be posted out on Thursday too. Woot!

Last post I discussed the plain wrap method for short rows. Today I’m going to look at yarn over short rows.

Method #2: Yarn overs

Instead of lassoing the turning stitch, the yarn over method creates an extra stitch that closes the gap formed by short row turns.  So instead of doing a wrap and turn, simply turn the work.  To create the yarn over, bring the yarn from front (where it would be ready for purling) to the back between the needles, and bring it over (see, yarn over! there is method to the madness)  the needle to purl the next stitch. You’ve then created a yarn over which sits at the outside of your row, paired with a regular stitch.

In the photo below, reading the knitting from the right to the left on the left needle, the first stitch is the regular stitch, the stitch to the left of it is the yarn over.  There are 4 yarn over pairs – can you see them all? The regular stitch comes out of a v shaped stitch below it – the yarn over doesn’t.  There are also noticeable gaps between each yarn over pair.

Yarn over wraps

To create a yarn over at the start of a knit row, bring the yarn from the back (where it would be ready for knitting) to the front, and then over the needle to the back to knit the first stitch. Now you’ve got a yarn over stitch sitting at the outside (right side when looking at it from the right side of your work) of your knit row. You’ll see from the photo I’ve only done the yarn overs at one side, created when working the purl rows only.

To work them, on the knit side of the fabric, you would knit to the first regular stitch of the first yarn over pair. Knit that regular stitch and then work the yarn over together with the next regular stitch by knitting the two together.

Remember the gaps I mentioned above?  The yarn over is on one side of the gap, and the regular stitch on the other (see photo below, where I’ve already knit the regular stitch of the first yarn over pair).  Working them together closes that gap.

Working a yarn over short row

This is a nice easy method but alas, it also has a finicky side to it.  On a purl side, you would need to purl the first regular stitch, then do some knitting acrobatics to make this side mirror the k2tog on the knit side – an SSP. That is,  slip the yarn over knitwise and the next regular stitch knitwise, then purl both of them together through the back loop. Since all my yarn overs on the sample are worked on the knit side, I’ve managed to sneakily avoid doing SSPs.

Worked yarn over short rows

Back of worked yarn over short rows

Not a bad method – and in a pinch for regular stockinette fabric I’d opt for this over the wraps as there isn’t all that lifting and stretching.

Next up… Japanese Short Rows (or how to make yourself crazy with safety pins)

k1, yo, k1 tutorial

Here’s a video tutorial for how to k1, yo, k1 in a stitch.  The double wrap instruction comes from the March Knit Love Club pattern, currently still spoiler shielded. More on the sock in a few week’s time. 🙂

Meanwhile here’s some Yutube for you!

Doubled Long Tail Cast-on

Repost from last year’s Socktopus Club:

For the cast on edge of Fiori di Zucca.

You’ll need to be familiar with the long tail cast on, aka double cast on, continental cast on, sling shot, two-strand, Y cast on, german cast on. Knittinghelp has a great video tutorial for it.

A doubled tail long tail long tail cast on basically takes the tail, doubles it, and continues as normal. I learned this from JC Briar, an absolutely amazing teacher. Lucy Neatby also refers to this in her knitting videos. The doubled tail strand, which sits like scarves around the base of the stitches on the needle, gives a lovely rolled cast on edge, and also helps give a good elasticity to the cast on. Don’t pull tight on the tail strand, just pull it so that it sits cleanly under the stitches. Too tight, you’ll lose your nice elastic edge, too loose and it’ll look sloppy. Experiment to find just the right tension for you.

I start with yellow and blue spitpliced yarn to help you see which bit of yarn does what. Blue for the yarn that comes from the ball, and yellow for the tail end.


So take the tail end, fold it in half like so, and place over the needle.


Take your finger, and place it over the yarn and the tail end to keep it from moving around.

Then continue on your way with a normal long tail cast on, bringing your needle towards you, then under the loop on your thumb.


Then snag the ball yarn


and bring it through the tail loop towards you to create a new stitch.

Take your thumb out of the tail loop, and pull it (not too tight, just so that it sits cleanly under the new stitch on the right needle)

Stretching your thumb and finger apart, whilst holding on to the tail and ball yarns in the rest of your fingers, will help tighten up loose stitches.

Repeat process for more stitches.


By the third new cast on stitch you’ll be able to take your right index finger off the tail end and first cast on loop, and it’ll hang there nice and obedient until weaving in time!